Model

R10a

R20a

R50a

R100a

 Rotation 

500 rpm (maximum recommended)

 Output Power

1/4 HP

 Pneumatic (AIR) summary

-Compressed air pressure range: 5 to 80 psi (0.2 to 0.55 MPa) - Working temperature: -10C to +70C - For constant use: set rpm to 80% of maximum rpm - Motor lubricant    • Mobil Grease XHP 222, Lithium Complex, Blue, NLGI Grade 2    • Check/replenish/replace every 500 hours - Air lubricant    • Type: JIS K2213-1 (ISOVG32)    • Recommended products: Shell Vitrea Oil 32, JOMO Turbine 32, COSMO Turbine 32    • Speed: 2-3 drops per minute - For safety purposes, detach compressed air supply when not in use, left un-attended or at night - Air pressure to motor will vary depending on air flow rate and torque demand required. The reactor should not shake or rock violently when in use. If it does, the motor speed is too high. - Do not run motor un-loaded - Set Air Adjuster to minimum at initial run, make sure motor is working properly, before increasing CFM - Before inspecting unit, stop the motor and detach air supply. Do NOT inspect unit when motor is in action. - Make sure exhaust port/hole is clear from any debris or blockage - Check every 2-3 days: Air Lubricant, Air Filter water drain

Glass Vessel Temperature Range

-110 °F to 400 °F / -80 °C to 200 °C

Thermocouple

AA-battery powered| Pt100

Cooling/heating jacket capacity

0.8 gallon (3L)

1.6 gallons (6L)

4.2 gallons (16L)

8 gallons (30L)

Maximum jacket pressure

4.4 PSI (0.03 MPa)

Vacuum Level

20 torr

Vacuum Gauge

Mechanical

Vacuum Sealing

Glass or PTFE

Rotation Controller

Digital controller with variable frequency drive Rotation speed: 50 to 500 rpm

Agitator

Impellar design, type-304 stainless steel reinforced PTFE structure

Reaction Glass Vessel Capacity

2.6 gallons (10L)

5.3 gallons (20L)

13 gallons (50L)

26 gallons (100L)

Glass Material

High borosilicate glass 3.3

Vessel Head

Domed with multiple openings

Drain Valve

Flush seal design with large opening and flat flange clamp

Condenser

Dual-cooling coil design

Funnel

Pressure equalizing

Swivel Caster

Four

Drain port ground clearance

15 inches

13 inches

12.5 inches

13.5 inches

Unit Height

78 inches

80 inches

85 inches

98 inches

Unit dimensions (WxDxH)

18 x 26 x 78"

20 x 27 x 80"

26 x 33 x 85"

28 x 42 x 95"

Shipping Dimensions

24 x 67 x 26"

24 x 75 x 31"

25 x 83 x 42"

26 x 88 x 45"

Shipping weight

240 Lbs

262 Lbs

330 Lbs

390 Lbs