Electrical requirements

 220V 50/60Hz single phase, 20A, 4300 watt (rotation motor: 300 watts)

 Glass material

 High borosilicate glass 3.3

 Evaporating flask

 Capacity: 5.28 gallon (20 liters or 0.7 cu ft)  Maximum load: Not to exceed 60% of the flasks capacity  Sealing flange: 4.9" diameter  Rotation speed: 10 to 130 rpm  Evaporating speed: 1 gallon/hour (water), 2 gallon/hour (alcohol)

 Receiving flask

 2.64 gallon (10 liters or 0.35 cu ft)

 Condenser

 Glassware: Main + auxiliary triple-circulating cold traps, vertical  Chilling fluid conneciton: 3/8" hose barb x 4 (2 on main + 2 on auxiliary)  Condensing surface    Main condenser: 9,480 cm2 or 10.2 sq ft    Auxiliary condenser: 3,580 cm2 or 3.9 sq ft

 Working environment

 5 to 95°F

 Water bath

 Temperature range: ambient to 99°C (210°F)  Temperature controller: digital  Dimensions: 17.5" diameter x 9.8" depth x 12" height  Material: stainless steel  Media: distilled water only  Max. water level: not to exceed 1" from the top rim of the bath  Number of heaters: two  Drain port: one  Exterior liner: rubber  Lifting: motorized  Maximum lifting distance: 7.5 inches

 Vacuum

 Level: < 3 torrs  Sealing: PTFE + Viton gaskets  Connector: 3/8" hose barb x 1

 Swivel casters

 Four, built-in with locks

 Safety

 Dry-run, over-temp shut-off, built-in circuit breakers

 Shipping weight

 238 Lb (evaporator), 130 Lb (glassware)

 Unit/shipping dimensions

 49 x 23.5 x 82.5" / 41 x 24 x 48" (evaporator), 34 x 29 x 33" (glassware) (WxDxH)

 Certification

 ETL tested to UL and CSA standards